4-2. Connection Between Other Equipments Excluding
CA130B/CA140B
4-3. DC IN/SYNC connector pin assignment
The connector is combined with DC12V input, and some other, and
recommended to use the system including an image processor.
They are composed of 12pins, and the pin assignment is as
followings.
Q
Camera connector ; HR10A-10P-12P (Maker ; Hirose denki)
* HD,VD output is available for internal switch selection.
* Clock output is available for internal switch selection.
The clock output cannot be made when the shutter trigger is being
input (when the special shutter function is being used).
- 12 -
- 11 -
CAUTION
When using the camera on systems that accept EC (EMC)
instructions, be sure to use the optional shielded camera cable
(CPSC3000 or equivalent).
CAUTION
When using the camera on systems that accept EC (EMC)
instructions, be sure to attach the ferrite core (included as an
accessory) to the camera end of the camera cable.
External synchronization
Pin
No.
HD and VD
VS/SYNC
Restart-Reset
Internal
Svnchronization
1 GND
GND
GND
GND
2 +12V
+12V
+12V
+12V
3
Video output
(GND)
Video output
(GND)
Video output
(GND)
Video output
(GND)
4
Video output
(signal)
Video output
(signal)
Video output
(signal)
Video output
(signal)
5
HD input
(GND)
------------------------------
-
HD input
(GND)
HD output
(GND)
6
HD input
(signal)
------------------------------
-
HD input
(signal)
HD output
(signal)
7
VD input
(signal)
VS/SYNC input
(signal)
R.R input
(signal)
VD output
(signal)
8
Shutter trigger input/
Clock output
(GND)
Shutter trigger input/
Clock output
(GND)
Shutter trigger input/
Clock output
(GND)
Shutter trigger input/
Clock output
(GND)
9
Shutter trigger input/
Clock output
(signal)
Shutter trigger input/
Clock output
(signal)
Shutter trigger input/
Clock output
(signal)
Shutter trigger input/
Clock output
(signal)
10 GND
GND
GND
GND
11 +12V
+12V
+12V
+12V
l2
VD input
(GND)
VS/SYNC input
(GND)
R.R input
(GND)
VD output
(GND)
