9.2 Switching box
9-7
Note
■
Record of measurement value
The method to measure and record data sequentially from channel 0 to channel 4 of CSW-5B is
called scanning measurement. Two types of scanning measurement are available: Manual
measurement activated by pressing
[ENT/START]
key; and Automatic measurement allowing
automatic recording (interval measurement).
At the time of scanning measurement, the TC-32K recognizes the box number of CSW-5B, and
displays and records measurement value according to the sensor mode, coefficient, indication digits,
unit and initial value of the channel of the box number. Operation procedures of manual
measurement and automatic measurement are similar to those for single channel mode.
■
Various checks
This function allows check of sensors and coefficient settings for five points at the same time.
Press
[ENT/START]
key
to
update the monitor display for 5
channels at once.
✍
To record measurement values,
set
“On” of record in the data
memory or CF card.
Note
○
Insulation check/Resistance check
Move the “*” mark with
[▲][▼]
keys to
select a channel to be checked (monitored).
Press
[ENT/START]
key, and check of
each channel starts sequentially.
CSW-5B does no support TEDS
sensor.
○
Other checks
Press
[ENT/START]
key, and check of
each channel starts sequentially.
Summary of Contents for TC-32K
