PLS-601 User's Manual
Document #11696 Page - 21
4.2.3 SET Function - Continued
MODIFYING EXISTING CHANNEL LOBE DATA
Display:
CH A01 F
1
2 3 - T 3 4 5
(Highlighted character indicates blinking character that can be changed)
Select:
DATA 0 - 9
The numerical value of the selected DATA KEY is
displayed in the present cursor position. As an example,
the value of 123 will be entered into the FROM fie ld and
the value of 345 will be entered into the TO field.
Select:
<
CURSOR
Moves the cursor left within the three digit FROM or TO
data fields of the front panel display.
New Display:
CHA01 F 1 2 3 - T 3 4
5
Select:
>
CURSOR
Moves the cursor right within the three digit FROM or
TO data fields of the front panel display.
New Display:
CHA01 F
1
2 3 - T 3 4 5
Select:
INC
Increments the numerical value at the current cursor
location in the FROM or TO data fields. If the cursor is
between the FROM and TO data fields, both FROM and
TO data values will be incremented and placed into
memory. The INC key does not require the use of the
ENTER key.
New Display:
CHA01 F
2
2 3 - T 3 4 5
Select:
DEC
Decrements the numerical value at the current cursor
location in the FROM or TO data fields. If the cursor is
between the FROM and TO data fields, both FROM and
TO data values will be decremented and placed into
memory. The DEC key does not require the use of the
ENTER key.
New Display:
CHA01 F
1
2 3 - T 3 4 5
Select:
CLEAR
The displayed LOBE is erased from memory allowing
for new LOBE data to entered.
New Display:
CHA01 F _ _ _ - T _ _ _
Select:
ENTER
The displayed FROM and TO data fields are entered into
memory. The cursor is set to the ‘-‘ position between the
FROM and TO fields and the data is now considered as
existing data.
New Display:
CHA01 F 1 2 3 - T 3 4 5
