PLS-601 User's Manual
Document #11696 Page - 39
5.3 SELECTING THE NUMBER OF TURNS (MASTER MODE) - continued
Select:
CURSOR
Moves the cursor left or right within the three digit TURNS
field.
New Display:
TURNS 1 0
0
Select:
CLEAR
The value of the number of TURNS is set to 100 and entered
into memory.
New Display:
TURNS
1
0 0
Select:
ENTER
The displayed number of TURNS is entered into memory.
Select:
FUNCTION:
Pressing the FUNCTION key at any time while in
NUMBER of TURNS function will terminate the TURNS
function and return the user to FUNCTION select mode where
any one of the PLS-601 other functions can be selected.
5.4 USING THE STANDARD FUNCTIONS (PROGRAM/DISPLAY MODES)
Once the NUMBER of TURNS has been selected in MASTER MODE, the ten standard PLS-601
functions can be used in the PROGRAM or DISPLAY MODES. The following sections describe
the differences between the Model 10 functions as described in Section 4.2, and the Model 11
functions.
5.4.1 POWER ON
See Section 4.2.1 for a complete description of POWER ON
Display:
P10140 PROG
1
R030
5.4.2 POS/TACH
See Section 4.2.2 for a complete description of POS/TACH
Display:
P10140 PROG1
R030
5.4.3 SET
With the SET function, the INC/DEC keys DO NOT enter data immediately into memory. The
displayed data must always be entered via the ENTER key.
The dash symbol (-) between the FROM and TO fields will be changed to an asterisk (*) to
indicate that the displayed data must be entered into memory.
See Section 4.2.3 for a complete description of SET FUNCTION
A. SELECTING THE CHANNEL
Display:
A
01F_ _ _ _ _-T_ _ _ _ _
B. ENTERING LOBES
Display:
A01F10140-T10230
