31
7.2.6
LUBRICATING THE SLIDING GUIDES
The sliding guides on the
carriage must be lubricated
regularly using the oil supplied.
To do this, put a few drops of oil
into the hole located next to the
graduated dial and identified by
the OIL plate. Occasionally, lift
the machine up (Fig. 20) and
lubricate the points indicated by
arrows 1 and 2.
Figure 24 - Lubrication Points
CHAPTER 8 DEMOLITION AND DISPOSAL
INFORMATION FOR USERS
In accordance with Article 13 of Italian Legislative
Decree of 25 July 2005 no. 151 “Implementation of
Directives
2002/95/EC,
2002/96/EC
and
2003/108/EC,
regarding
reducing
the
use
of
hazardous substances in electrical and electronic
equipment, in addition to waste disposal”.
The crossed-out rubbish bin symbol shown on the slicing machine indicates that, at
the end of its useful life, the product must be collected separately from other
waste.
The user must, therefore, take the slicing machine which has reached the end of
its life cycle to a suitable collection centre for electronic and electrotechnical
waste or return it to the dealer when purchasing a new, equivalent slicing
machine on a one-for-one basis.
Appropriate separate waste collection for subsequent sending of the disused
slicing machine for recycling, treatment and compatible environmental
disposal contributes to preventing possible negative effects on the
environment and favours recycling of the materials of which the slicing
machine is composed.
The abusive disposal of the product by the user leads to the application of the
penalties envisaged by current regulations regarding the matter.
Summary of Contents for CROMATIC 250
