19
ENGLISH
INTRODUCTION
Congratulation that you took the choice to purchase this Tomahawk RC model airplane, a very good
choice from our point of view.
We at Tomahawk Aviation put a lot of attention to the overall quality of the airplane in terms of de
-
sign, performance and manufacturing quality. We used all of our experience designing and building
high quality aircraft in order to present you an exceptional product. We chose high grade material and
looked after high end accessories in order to ensure top level outcome in terms of function, perfor
-
mance and durability of the product. We are open and offer all necessary support in case you should
find any problem with your airplane.
As you are well aware this is a technical product. Due to its nature it is required if not mandatory to
read the instruction manual completely. Please follow the steps to complete your model as described.
It will ensure that your model will turn out in the best possible way. Please also take notice and good
care about the warning messages at the end of the instruction manual. Knowing about them ensures
that you can operate the model in the safest possible manner keeping risk away from you and other
persons. Also ensure that you comply with the latest legislation in terms of flight safety.
We at Tomahawk Aviation wish you all the best for building and especially operating your RC airplane.
In case you have any questions please contact us. We are driven to offer the best possible support at
any time.
Span
5500 mm
Length
2250 mm
Flying weight
8600 g
Wing area
165,5 dm²
Airfoil
HQ/W-2,5/12 + HQ/W-2,5/11 + HQ/W-3/10,5
SPECIFICATIONS
NEEDED ACCESSORIES
ARF-Version
PNP-Version
Motor
ROXXY BL Outrunner D50-65-290kV
Himax C5030 (310KV) built-in
ESC
ROXXY BL Control 9100 - 6
ROXXY BL Control 9100 - 6
BEC
JETI Max BEC
JETI Max BEC
Servos
6x HITEC HS-645MG
6x Tomahawk T-695 MG built-in
Servo cables
app. 7m Servo Plugs
built-in
Multilock
4x Mulitlock System
built-in
MPX-Plugs
2 pairs MPX Plugs
built-in
Battery pack
6S LiPo 5000-6000mAh
6S LiPo 5000-6000mAh
Folding prop
20x8“
CFK 20x8“ included
Spinner
50mm
50mm Aluminum included
TX
min. 7 Channels
min. 7 Channels
RX
min. 7 Channels
min. 7 Channels
Glues
5min epoxy resin
60min epoxy resin (UHU Endfest 300)
Superglue thin
Thread locker
5min epoxy resin
60min epoxy resin (UHU Endfest 300)
Superglue thin
Thread locker