17
Check fuel level.
Change engine oil.
Clean recoil starter
Every 2
weeks or
25 hours
Every
month or
100 hours
Every
year or
300 hours
5. Maintenance
5.1 Periodic Maintenance Schedule
The chart below lists basic engine maintenance. Refer to engine manufacturer's Operation
Manual for additional information on engine maintenance.
* Change ramming system oil after first 50 hours of operation.
* Change ramming system oil after first 50 hours of operation.
Note: If engine performance is poor, check, clean, and replace air filter elements as needed.
Daily
before
starting
Check engine oil level
Inspect fuel lines & fittings
Clean engine’s cooling fins
Clean and check spark plug
Replace Spark Plug
Change ramming system oil
Clean muffler & exhaust
Tighten rammer’s shoe
Check & tighten engine’s
cylinder screws
After
first 5
hours
Tighten external hardware
Summary of Contents for TR68H
