19
5.4 Air Filter
A clean engine will extend engine life. Keep the air filter clean at all times. Clean the ram-
mer’s air filter using the recommended solvent daily. See engine manual for proper clean-
ing procedure. Let the filter dry before reinstalling.
5.5 Storage
The rammer should be stored on level ground, after the engine and machine have cooled
down. Be sure to secure the rammer as necessary to avoid it from falling down. Ifthe
rammer has to be laid down, tighten fuel tank cap and engine oil plug securely andwait
until the engine and machine are cooled down. After laying it down, make sure that there is
no fuel or oil leak (if fuel leaks, drain the tank).
5.5.1 Long-Term Storage
- Drain fuel from fuel tank, fuel line and carburetor.
- Remove spark plug and pour a few drops of motor oil into cylinder. Crank engine 3 to 4
times so that oil reaches all internal parts.
- Clean exterior with a cloth soaked in clean oil.
- Store unit covered with plastic sheet in moisture free and dust free location out of direct
sunlight.
NEVER use gasoline or other types of low flash point solvents for cleaning the
air cleaner. A fire or explosion could result.
WARNING
Summary of Contents for TR68H
