3.
Mount the belt partially on the Transmission
CVT and hold in place with left hand.
3.
Mount the belt partially on the Transmission
CVT and hold in place with left hand.
4.
Make sure the transmission is in neutral.
Using your right hand hold the Engine CVT
and turn counter clockwise until belt is
seated.
5.
The gap should be 5-7 cm (2.0-2.9in)
measured at midpoint between the two
CVTs. If an adjustment is necessary see Belt
Tension Adjustment
TOMCAR
USA, Inc.
|
1727 E. Deer Valley Road
|
Bldg. 2, Ste. 1
|
Phoenix, AZ 85024
43
06222010-v2.0