PAGE 8
CONTROLS AND FUNCTIONS
SEE FIGURES (1-6B) ON PAGE 7
SEE FIGURE 1
1. STEERING WHEEL:
STEERS THE MACHINE.
2. ADJUSTABLE SEAT WITH ARM RESTS:
YOUR MACHINE IS EQUIPPED WITH AN ADJUSTABLE SEAT WITH ARM RESTS FOR COMFORT
3. RECOVERY TANK:
HOLDS UP TO 40 GALLONS OF DIRTY WATER RECOVERED BY THE MACHINE.
4. SOLUTION TANK:
HOLDS UP TO 38 GALLONS OF CLEAN WATER AND SOLUTION DETERGENT.
5. HEAD LIGHT:
HELPS YOU SEE IN LOW LIGHT AREAS AND TO WARN ONCOMING TRAFFIC.
6. FRONT DRIVE WHEEL:
DRIVES AND STEERS MACHINE
.
7. BUMPER ROLLERS:
HELPS PREVENT DAMAGE TO MACHINE AND OBJECTS THAT YOU MAY DRIVE CLOSE TO WHILE CLEANING.
8. DOOR WIPER:
GOES UP AND DOWN WITH SCRUB DECK TO KEEP WATER FROM SPLASHING OUT OF MACHINE.
SEE FIGURE 2.
9. SEAT ADJUSTMENT:
PERMITS THE SEAT TO BE ADJUSTED FORWARD AND BACKWARDS FOR OPERATORS COMFORT.
10. HORN BUTTON:
SOUNDS THE HORN FOR WARNING ONCOMING TRAFFIC.
11. SOLUTION LEVEL INDICATOR:
SHOWS OPERATOR THE PRECISE LEVEL OF CLEANING DETERGENT IN THE TANK.
12. SOLUTION FLOW CONTROL:
USED TO MODULATE THE SOLUTION FLOW (GPM).
13. NON SLIP FLOOR PLATE:
HELPS PREVENT SLIPPING WHILE GETTING ON AND OFF OF MACHINE.
14. FOOT PEDAL :
CONTROLS THE ACCELERATION AND DECELERATION OF THE MACHINE.
15. CHARGER PORT:
RED 50 USED TO RECEIVE CHARGER INPUT.
NOTE:
ONLY USE CHARGER PROVIDED.
16. ADJUSTABLE STEERING:
FOUR SETTINGS FOR OPERATOR COMFORT AND EASE OF ENTRY.
17. CIRCUIT BREAKER:
50 AMP RESETABLE CIRCUIT BREAKER.
SEE FIGURE 3
18. RECOVERY DRAIN HOSE:
ALLOWS FOR CONTROLLED DRAINING OF THE RECOVERY TANK.
19. VACUUM HOSE:
VACUUMIZES SQUEEGEE .
NOTE:
KEEP FREE AND CLEAR OF BLOCKAGE.
20. VACUUM HOSE:
MAIN VACUUM HOSE FROM VACUUM TO RECOVERY TANK.
21. SQUEEGEE BLADE:
SQUEEGEES WATER TO BE RECOVERED BY THE VACUUM HOSE.
SEE FIGURE 4
22. SIDE DOOR:
PROVIDES EASY ACCESS TO SCRUB DECK.
23. SCRUB DECK:
MAIN COMPONENTS THAT SCRUB AND CLEAN FLOORS.
24. REAR WHEELS:
NON MARKING REAR TIRES
25. SQUEEGEE BLADE PROTECTION WHEELS:
HELP PROTECT THE SQUEEGEE WHEN CLEANING CLOSE TO OBJECTS.
SEE FIGURE 5
26. RECOVERY ACCESS DOOR:
USED FOR FLUSHING OUT RECOVERY TANK WITH FRESH WATER.
27. BATTERIES:
YOUR MACHINE IS EQUIPPED WITH FOUR (6 VOLT DEEP CYCLE 396 AMP HOUR BATTERIES)
28. FOAM PROTECTION SCREEN:
USED TO PROTECT VACUUM MOTOR FROM DEBRIS.
29. BATTERY ACCESS LID:
USED TO VENT BATTERIES DURING CHARGING, OR TO ACCESS BATTERIES FOR SERVICE.
SEE FIGURES 6A AND 6B
30. HIGH WATER RECOVERY LIGHT:
INDICATES WHEN THE RECOVERY TANK IS NEARLY FULL.
31. LCD SCREEN:
LISTS FUNCTIONS AND SETTING OF THE MACHINE.
(SEE PAGES 17-19)
32. SQUEEGEE SWITCH:
RAISES AND LOWERS THE SQUEEGEE.
33. ONE TOUCH BUTTON:
ACTIVATES BRUSHES, SQUEEGEE, VACUUM SYSTEM, AND SOLUTION FLOW SIMUTANEOUSLY.
34. LOW WATER SOLUTION LIGHT:
INDICATES WHEN THE SOLUTION TANK IS DOWN TO 5 GALLONS.
35. MENU CONTROL:
SCROLLS THROUGH DIFFERENT OPTIONS ON THE LCD DISPLAY.
36. KEY SWITCH:
TURNS THE MAIN POWER ON AND OFF.
37. OPTIONAL RECYLING SWITCH:
TURNS ON THE RECYCLING PUMP.
(GREEN)
38. SCRUB DECK DOWN PRESSURE SWITCH:
CONTROLS THE PRESSURE PUT ON THE SCRUB DECK.
39. VACUUM WAND SWITCH:
TURNS ON THE VACUUM MOTOR.
(WHITE)
40. OPTIONAL SPRAY JET:
TURNS ON THE SPRAY JET PUMP.
(BLUE)
41. SCRUB DECK SWITCH:
RAISES AND LOWERS THE SCRUB DECK.
42. SOLUTION SWITCH:
OPENS AND CLOSES THE SOLUTION VALVE. GLOWS BLUE WHEN OPEN.
43. FORWARD/REVERSE SWITCH:
CONTROLS THE DIRECTION OF THE TRACTION MOTOR.
(RED)
chadv
11/23/2005 9:54:13 AM
