THESE TOUGH, COMPACT SCRUBBERS COMBINED THE PRODUCTIVITY OF RIDERS WITH THE
MANEUVERABILITY OF WALK-BEHINDS.
TOMCATS
ARE DESIGNED TO CLEAN SCHOOLS, MALLS,
WAREHOUSES, RETAIL OUTLETS, WHILE STANDING UP TO THE REGORS OF CONTRACT CLEANING.
WITH TWO SPECIALIZED CLEANING SYSTEMS TO CHOOSE FROM,
TOMCATS
OFFER THE PERFORMANCE
AND CAPACITY REQUIRED TO CLEAN YOUR UNIQUE APPLICATION.
THE TWO "DISK" MACHINES, WITH 29", AND 35" SCRUB PATHS, OFFER GIMBALED BRUSH DRIVE AND 35%
MORE SCRUBBING POWER THAN COMPETITIVE BRANDS.
THE "CYLINDRICAL" MACHINES, OFFER ALL THE PERFORMANCE OF DISK SCRUBBERS PLUS THE ABILITY TO
SWEEP. THE CYLINDRICAL PICKS UP WOODCHIPS, NAILS, BROKEN GLASS, GRAVEL, AND METAL CHIPS.
THE DEBRIS IS HELD IN THE SLIDE-OUT HOPPER WHICH PERMITS EASY DISPOSAL.
PRODUCTIVITY IS A FUNCTION OF SCRUB WIDTH, RUN TIME AND TANK CAPACITY. THESE
TOMCATS
TOP
THE CHART, WHILE MAINTAINING UNSURPASSED MANUVERABILITY. WITH 40% LAGER TANKS, WIDER
SCRUB PATHS, HIGHER SCRUBING PRESSURES, MORE VACUUM, AND BIGGER BATTERY PACKS YOU WILL
HAVE LESS STOPING TO REFILL, FEWER TRIPS DOWN THE AISLE, LESS DOUBLE SCRUBBING, DRY SAFE
CLEAN FLOORS, AND EXTRA RUN TIME.
THE OPERATOR SITS IN A SPRING- SUSPENSIONED, FULLY ADJUSTABLE, MID-BACK CHAIR. THE STEERING
COLUMN HAS FOUR SETTINGS, FURTHER ENHANCING OPERATOR COMFORT. HEADLIGHT, HORN
BACKUP ALARM, NON-MARKING TIRES, AND ARMRESTS ARE STANDARD. OPERATORS ARE ABLE TO
TURN WITHIN A 64" AISLE, WHILE MAINTAINING EXCELLENT WATER CONTROL. WE ALSO OFFER, FOR
CLEANING IN REMOTE AREAS, A COMPLETE LINE OF HAND TOOLS, INCLUDING VAC WANDS, SPRAY
HOSES, AND POWERED SCRUB WANDS.
TOMCATS
EXCLUSIVE
"CENTRAL COMMAND II"
ENERGY MANAGEMENT SYSTEM OFFERS AUTOMATIC
CONTROLS. WHEN THE OPERATOR STOPS THE MACHINE, BRUSHES, AND SOLUTION FLOW STOPS, THE
SAFETY-SET PARKING BRAKE IS APPLIED, AND VACUUM STOPS AFTER A 22 SECOND DELAY. ALL
"CENTRAL COMMAND"
COMPONENTS, INCLUDING THE CONTROLLER, AUTO REST CIRCUIT BREAKERS,
AND MARINE DUTY SWITCHES, ARE IN A SEALED MODULE.
TOMCATS
USE THE MOST POWERFUL MOTORS AVALIABLE, SO THEY ARE TYPICALLY RUN AT ONLY 75%
OF THEIR CAPACITY. THIS LEAVES POWER IN RESERVE FOR TIMES WHERE HEAVY STRIPPING IS REQUIRED,
AND GREATLY PROLONGS MOTOR LIFE. THESE
TOMCATS
ARE CONSTUCTED OF HEAVY GAUGE STEEL,
AND SPECIALLY PLATED OR POWDER PAINTED TO PROTECT YOUR INVESTMENT. THE TANKS HAVE EXTRA
THICK WALLS, QUALITY INSERTS, AND
"THROUGH TUBES"
FOR STRENGTH. STEEL BUMPERS PROTECT THE
SCRUBHEAD AND FRONT END FROM COLLISION DAMAGE. THE CORNER ROLLERS ARE POLYURETHANE,
AND TALL TO DISPERSE THE FORCE OF IMPACT WITHOUT LEAVING MARKS ON YOUR WALLS. THE WHOLE
MACHINE IS PUT TOGETER WITH STAINLESS STEEL FASTENERS TO HELP PROLONG THE LIFE AND
DURABILATY OF YOUR MACHINE.
290/350 RIDER SCRUBBERS
