PAGE 8
CONTROLS AND FUNCTIONS
1. MAIN POWER SWITCH:
Turns the machine on and off.
2. BATTERY GUAGE/HOUR METER:
Indicates the amount of battery charge remaining.
3. SCRUBDECK DOWN PRESSURE GUAGE:
Indicates the amount of down pressure being applied to scrubdeck.
4. SOLUTION FLOW SWITCH:
Turns solution flow on.
5. SCRUBDECK SWITCH:
Raises and lowers the scrubdeck and controls amount of down pressure being applied.
6. KEY SWITCH:
Turns power on to the machine. (Standard on Traction Drive, Optional on Brush Drive.)
7. CIRCUIT BREAKER:
2 AMP resettable circuit breaker.
8. CIRCUIT BREAKER:
25 AMP resettable circuit breaker
.
9. CIRCUIT BREAKER:
40 AMP resettable circuit breaker.
10. SPRAY JET (BLUE) (OPTIONAL):
Activates Spray Pump for remote Spray Wand.
11. CHARGER PORT:
Red 50 used to receive charger input for optional external charger.
12. HANDLE BAR:
Adjustable Handle Bar
13. REVERSE SWITCH:
Pull back for reverse.
14. SOLUTION FLOW CONTROL KNOB:
Turn clock-wise to reduce, counter-clockwise to increase solution flow.
15. LCD SCREEN:
Lists functions and settings of the machine.
16. MENU CONTROL:
Scrolls through different options on the LCD display, there are three different screens.
17. SCRUBDECK SWITCH:
Raises and lowers the scrubdeck.
18. DOWN PRESSURE TOGGLE SWITCH:
Controls the pressure to the scrubdeck, push forward for more down pressure.
19. WARNING PLATE:
Explosion warning.
20. WARNING PLATE:
Detergent/Water warning
.
21. SERIAL NUMBER PLATE:
Machine identification.
22. SPEED CONTROL KNOB:
Controls the speed of the Traction Drive. Turn counter-clockwise to reduce speed.
23. TRACTION DRIVE:
Propels machine forward/backward
.
24. SOLUTION FLOW VALVE:
Controls solution flow rate.
25. SOLUTION FILTER:
Filters water solution prior to scrubbing
.
26. WALL ROLLERS:
Helps protect machine when scrubbing near walls.
27. "PAD ASSIST" DRIVE ADJUSTMENT KNOB:
Adjusts amount of offset being applied to brush.
28. DRIVE BUTTON:
Depress to drive forward, release to stop. (starts & stops the drive motor)
29.
"DRAIN SAVER"
STRAINER
:
Helps prevent clogging of drain ports.
30
.
VAC SCREEN:
Protects Vac Motor from debris.
31. CASTER:
Twin casters for stability.
32. MAIN TIRE:
Drive Tires.
33. JAWS:
Protects Scrubdeck from collision damage.
34. TANK-IN-TANK:
Solution/Recovery Tank (17 gallon capacity each).
35. SOLUTION FILL LID:
Fill port for filling Solution Tank.
36. RECOVERY LID:
Used for flushing out Recovery Tank area with fresh water.
37. CLEAR COVER:
For viewing inside Recovery Tank area.
38. CONTROL PANEL:
Machine controls and access to electrical components.
39. SOLUTION LEVEL INDICATOR & DRAIN TUBE:
Shows precise level of cleaning solution in Tank & Drain Port.
40. VACUUM HOSE:
Vacuumizes Squeegee.
NOTE
: Keep free and clear of blockage.
41. SQUEEGEE BLADE:
Recovers dirty water from floor to be recovered by Vacuum Hose.
42. SQUEEGEE PITCH ADJUSTMENT:
Adjusts pitch of Squeegee. Deflection should be even across entire blade.
43
. "ON BOARD" BATTERY CHARGER:
Recharges Batteries.
44. RECOVERY DRAIN HOSE:
Allows for controlled draining of Recovery Tank.
45. TANK LATCH:
Secures tank to frame.
