parent unit LEDs
charging your monitor before first use:
THE PARENT UNIT:
The parent unit is supplied with a rechargeable battery pack.
To insert the battery pack, open the battery casing with a screwdriver. Insert the supplied
rechargeable battery pack. Take extra care to ensure that the battery pack is inserted correctly and
the right way round. Refit the battery casing securely with a screwdriver.
DO NOT use a non-rechargeable battery pack. ONLY use battery pack supplied.
Plug the mains power cable into socket on side of parent unit and connect the other end of the
mains power cable to the mains power.
Power on the parent unit and charge for 10 hours before use.
THE BABY UNIT:
The baby unit does not require batteries if powered from the mains.
If mains usage is not available, the baby unit will operate on batteries 4 x alkaline AA (LR6), which are
not supplied.
To insert batteries, open the battery casing with a screwdriver. Insert 4 x alkaline AA (LR6) batteries
(rechargeable or non-rechargeable, but not mixed) and close casing securely with screwdriver. Take
extra care to ensure that the batteries are inserted correctly and the right way round.
There is NO charging function on the baby unit.
The battery light flashes orange to indicate the battery is low.
Battery power is disconnected automatically when the mains adaptor is in use. If the adaptor is turned off
at the mains and still remains connected to the monitor then the batteries will be automatically activated.
1
1
2
3
4
5
2
3
4
5
6
M
3
20°C
3
20°C
correct use of batteries
•
Non-rechargeable batteries are not to be recharged.
•
Rechargeable batteries are to be removed from the baby unit before being charged.
•
Rechargeable batteries are only to be charged under adult supervision.
•
Different types of batteries or new and used batteries are not to be mixed.
•
Only batteries of the same or equivalent type as recommended are to be used.
•
Batteries are to be inserted with the correct polarity.
•
Exhausted batteries are to be removed from the monitor.
CAUTION: risk of severe malfunction if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
SIGNAL STRENGTH
BATTERY
ZOOM
SENSOR PAD
NO MOVEMENT
ALARM
SPEAKER
TEMPERATURE
FLASH
ON
ON
FLASH
ON
OFF
ON
FLASH
OFF
ON
Signal obtained, but no connection
Signal weak
Signal good
Signal excellent
Signal out of range
Empty and needs to be recharged
Low
Full
Charging
Display when the Sensor Pad is
connected securely and turned ON
Flashes when Sensor Pad is ON but not
securely connected/disconnected
Show as constant when Sensor Pad is
connected but switched off at Baby Unit
OFF when Sensor Pad function is OFF
and not connected
Display when the ALARM is triggered
Flashes if alarmed but then the child
starts to move again
Indicates volume level when user
adjusts volume
Degree
Celsius
Fahrenheit
PAD OFF
°
C
F
MAINS POWER
NIGHT LIGHT
ON
On when parent unit is connected with
AC power adaptor and without battery
pack installed
Low
Medium
High
3
2
1
CAUTION:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions. Use only rechargeable Li-polymer battery 950mAh with rating: 3.7/950mAh.
Rechargeable battery: Manufacturer: BYD COMPANY LIMITED Model no.: SCD530-1
FOR REPLACEMENT PARENT UNIT BATTERIES, VISIT OUR WEBSITE www.tommeetippee.com
