You should thoroughly clean your straw after each use.
INSTRUCTIONS FOR CLEANING STRAW CUPS
Jackel International Limited trading as Mayborn Group
Northumberland Business Park West, Cramlington,
Northumberland NE23 7RH, UK
Copyright © Jackel International Limited 2015.
TOMMEE TIPPEE is a registered trademark of Jackel
International Limited.
Jackel International Limited retains all intellectual property rights
to this product, packaging and printed or electronic media
including all two and three dimensional designs, graphic images,
logos and text.
Jackel International Limited is incorporated in England and
Wales under company number 01894022.
Any manufacture, publication, copying, hiring, lending and
reproduction of any materials is strictly prohibited and
constitutes infringement.
International patent applications pending.
• Pull the straw downwards
and out from the lid
• Thread the straw back into the
trigger and clip the trigger back into
position.
CLEAN
REASSEMBLE
DISASSEMBLE
• Remove lid from cup base
• Pop up the straw by pressing
the trigger
• Remove the trigger from the lid
(wiggle left to right to release)
• Pull the trigger from the straw
• Pull straw up through lid
• Ensure silicone valve and straw is
clipped into place
INSTRUCTION FOR CLEANING MEALTIME CUPS
INSTRUCTIONS FOR CLEANING VALVE CUPS
You should thoroughly clean your valve after each use.
• Wash all parts thoroughly in warm
soapy water and rinse in clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing to
remove excess water and leave to
air dry before reassembling
• Wash all parts thoroughly in warm
soapy water and rinse in clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing to
remove excess water and leave to
air dry before reassembling
• Un-screw the lid
• Pull out the valve
• Separate the 2 parts of
the valve (soft & hard)
WARNING
• Ensure parts
A
and
B
of the soft side
are pushed through the holes of the
hard side. Ensure the cut
B
opens by
squeezing before use.
• Place the valve back in the lid, and
push until the sides lock into place
• Screw on lid
2
2
3
2
1
2
valve
1
4
5
6
DISASSEMBLE
CLEAN
3
CLEAN
REASSEMBLE
You should thoroughly clean your valve after each use.
• Align the two parts and press together
AS PER ILLUSTRATION
• Turn screw ring upside down and place
silicone disk inside with grooves facing up
• Remove lid from cup base
• Grip lid and turn the locking
connector anti-clockwise
DISASSEMBLE
REASSEMBLE
4
5
• Take the lid top and push down through
the hole in the silicone disk
• Align locking connector and turn clockwise
to lock
1
2
5
6
3
6
• Separate locking connector,
silicone disk, screw ring and lid top
• Place lid on base and align the 2 dots
on the back - Remember:
Do not over tighten.
4
Alignment indicator
Trigger
A
B
• Wash all parts thoroughly in warm
soapy water and rinse in clear water
• All parts can be washed in the
dishwasher (top shelf only)
• Always shake parts after washing to
remove excess water and leave to air
dry before reassembling
044700130
