.
- -
6
Turn off
To turn off the receiver, press the power button on the topside for
3 seconds. The LED indicator will flash briefly before switching
off the receiver. Note: When the receiver is in the cradle, the
receiver will switch off if the power to the cradle is interrupted or
switched off (to synchronize with vehicle ignition).
4.3 Charging
Low Power
The left LED(LED 1) indicator will turn RED (normally BLUE)
when battery power becomes low. Connect the receiver to a
powers source to continue operation and to recharge the battery.
Charging
The right LED(LED 2) indicator will turn RED (or ORANGE)
when the battery is being charged. When fully charged, the RED
indicator will switch off.
4.4 Bluetooth Communication
Waiting to connect
The left LED(LED 1) indicator will flash if there is no
communication between the receiver and another device.
Connected
The left LED(LED 1) indicator will turn to continuous lighting
when the receiver is connected through the wireless link with
another device.
4.5 GPS
Navigating
The right LED will flash GREEN (or ORANGE when charging) if
the receiver is able to determine the current position.
4.6 PIN CODE
The
PIN
code means Personal Identification Number for Bluetooth device and it is also
called as
Pass Key
. The Bluetooth GPS receiver has the default PIN Code, and is “
0000
”. Generally
speaking, there are two steps in Bluetooth connecting. One is pairing process, the other is link process.
If you need PIN code to pairing and connect, you can use the default pin code, “
0000
” to connect
Bluetooth device. Our GPS receiver belongs to non-safety connecting, you can use in general
application to finish connecting.
