122
The starting point of your route is converted to your first stop and then the route is planned
from your current location. Guidance to your destination begins. As soon as you start driving,
the guidance view is shown automatically.
Tip: There are two other ways to navigate using a saved route:
Select the starting point of the route. When the pop-up menu opens, select
Change to a Stop.
Alternatively, select
Drive to Route or Ride to Route in the Current Route menu.
Adding a stop to a saved route using the map
Note: You can also press and hold a location on the map and select Add to Current Route from
the pop-up menu.
1.
Press the switch view button to show the map.
Your complete route is shown on the map.
2.
Select the route.
3.
Select the pop-menu button to open the menu.
4.
Select
Manage Stops.
5.
Select
Add Stop to Route.
6.
Select your new stop on the map.
Tip: If you know the name of your new stop, you can use Search to select your stop instead of
using the map.
7.
Select the
Add Stop button to add this location as a stop.
Your route is recalculated to include your stop.
