10
Exit
closes the application. If you want to install the firmware on multiple devices,
disconnect the USB cable from the updated device and connect it to another LINK 510.
The tool automatically recognises the new connection and you can repeat the
installation as described above.
Using the XP Compatibility mode
If you want to use the LINK 510 Firmware-Update Tool on a computer with Microsoft
Windows Vista or Windows 7, you must run the tool in Windows XP compatibility mode
as it is not compatible with newer versions of Microsoft Windows.
To run the Firmware-Update Tool in XP compatibility mode, do the following:
1. Go to the installation folder of the Firmware-Update Tool on your computer and locate
the .exe file.
2. Right click on the .exe file and select
Properties
.
3. Select the
Compatibility
tab.
4. Select the checkbox for
Run the program in compatibility mode for:
.
5. Select
Windows XP
from the list and then click
OK
.
The tool can now be used on a computer with Microsoft Windows Vista or Windows 7.