Connecting to PRO and WEBFLEET
11.
20
Con-
nect-
ing to
PRO
and
WEB-
FLEET
Connect your navigation device to your LINK 510 to fully enjoy the benefits of your
WORKsmart solution.
To use a TomTom PRO navigation device in combination with the LINK 510 a
corresponding WEBFLEET subscription is required.
When you first switch on your navigation device, you are asked to connect it with the LINK
510 installed in your vehicle. You can do this immediately or at any time later by doing the
following:
1. Make sure that the LINK 510 is connected to power and has a GPRS connection.
2. Switch on your navigation device.
3. Tap the screen to bring up the Main Menu.
4. Tap
WORK
.
You are asked to start the activation process. After you have started the activation
process your navigation device starts searching for Bluetooth devices.
If your navigation device finds more than one Bluetooth device, it shows a list of the
available devices. Continue with step 5.
If your navigation device finds only one LINK 510, continue with step 6.
5. Select your LINK 510 from the list.
The name starts with LINK followed by the serial number of your LINK 510 or the licence
plate number of your vehicle. You can find the serial number on the outside of your
LINK 510.
6. Enter the Activation Code, which you can find in your WEBFLEET contract confirmation.
Select the appropriate subscription from the list, if there are several subscriptions to
choose from. Enter a name for your LINK 510 if you are asked to do so.
7. Enter the licence plate number of the vehicle.
