15
3.
Slide the watch out towards you into the palm of your hand.
Using an O-ring
If you lose your bike mount strap, you can use a standard O-ring to mount your watch on your
handlebars.
To use an O-ring, do the following:
1.
Turn the watch over and insert the O-ring in the hook nearest the front of the watch.
2.
Find a piece of rubber, for example, a piece of an old bicycle inner tube. This is needed to sit
between the mount and handle bars and prevents slipping.
3.
Place the mount onto the handle bars so that the piece of rubber is sandwiched between the
mount and the bars.
4.
Wrap the O-ring around the handle bars and lift it over the back hooks.
