23
2.2.3.3 PTZ SETUP
Move the cursor to
Ǐ
PTZ SETUP
ǐ˄
Icon highlighted when selected
˅
,press
Ǐ
Enter
ǐ
to enter
into setting interface, you can setup the parameters for each channel separately.
CH1~CH4:
you can select the CH1~CH4, CH5~CH8, CH9~CH12, CH13~CH16 here.
PROTOCOL:
select the protocol of different PTZ, there are two protocols to switch, and the
default is Pelco-D
BAUD RATE:
select the different baud rate for your PTZ, there are 1200, 2400, 4800, and 9600
DATA BIT:
there are 5,6,7,8 options to select, default setting is 8.
STOP BIT:
there are 1and 2 to select, the default setting is 1.
VERIFY:
there are None/Odd/Even/Mark/Space to select, the default setting is none.
ADDRESS:
Fill the code of respective PTZ
2.2.3.4 SYSTEM INFO
Move the cursor to
Ǐ
SYSTEM INFO
ǐ˄
Icon highlighted when selected
˅
,press
Ǐ
Enter
ǐ
to
enter into setting interface, at this interface mainly display system hardware features and
firmware version, include : Firmware version, MAC address and serial number.
Summary of Contents for PS-8316B
Page 1: ......
Page 10: ...10 2 1 3 MENU TREE ࡊࡡࡩࡘࡩ ࡍ ࡑ ࡘ 95 ࡋᕎ ࡳࡘࡐࡰࡌᕍࡩ ࡹࡋࡨ ࡐ ࡼ ...
Page 45: ...45 ...
