9
10
Assembly:
2. Attaching the leg tubes (con’t):
D. Align the narrow front leg tube and
insert into the frame.
E. Push on metal lock pin and continue
to push on leg tube until it locks
into place.
F.
Pull on the leg tube to ensure it is
locked.
3. Attaching the wheels:
A. Align a locking wheel and push onto
the end of the leg tube. Repeat for all
four locking wheels.
B. Ensure that the locking wheels are
aligned as shown.
4. Attaching the basket:
A. Wrap storage basket over the cross tube
and attach all six snaps.
B. Attach side snap to the back of the
hinge. Repeat for the opposite side.
5. Attaching the canopy:
A. Insert canopy clip through the slot in the
fabric so that the clip is on the outside of
the tubing.
B. Push the canopy onto the tubing until it
clicks into place. Repeat for the opposite
side.
C. Wrap canopy over the back of the
bassinet.
Section 4 - Bassinet Assembly - continued
Section 4 - Bassinet Assembly - continued