Tone Commander 6210/6220 User Manual
33
Feature Activator Keys
Feature Activator keys must be configured to match network feature
activator codes that have been assigned to your line.
Using the dial pad, enter the feature activator code assigned
by your network service provider.
If you need to make corrections while entering numbers,
select
Å
BKSP
(backspace) to delete the previous digit.
Select CALL if a call needs to be originated when the feature
is activated. When enabled, (CALL) will appear in the top line
of the display as shown above.
With CALL enabled, the feature is always activated within the
context of a call. Features that need to originate a call include
Call Forward (on Siemens EWSD), ICM intercom (on Nortel
DMS-100), and Call Pickup. The CALL feature is not used
with Lucent 5ESS Custom ISDN.
If the phone is on-hook when a Feature Activator key with
CALL enabled is pressed, a new call will be originated. If the
phone is already off-hook when the feature key is pressed, the
feature will be activated within the context of the current call.
Press the
Done
key twice to return to the key selection menu
or the
Setup
key to exit Setup Mode.
Done
10=NETWORK FA#59 (CALL)
|BKSP CALL
