22
TECHNICAL DATA
PROBLEM
TIP
When starting a
recipe, no water
comes out of the
machine (the
selected button
keeps blinking)
1.
Check the fuse
of the heating
element
2.
Check if during
the run of a recipe
the LED of both
solid state relays
are blinking.
3.
Update the
firmware
4.
Please, contact
your dealer.
The machine is not
visible in the TONE
App (Connection is
done by ethernet
cable)
1.
Check the
regulations of your
firewall for the
TONE app.
2.
Select the
automatic mode
in the ethernet
properties.
3.
Switch off/ on
the machine and
the TONE App
4.
Check if the
machine number is
visible in the TONE
App
5.
Please, contact
your dealer.
The machine is not
visible in the TONE
App (Connection
is done over wifi
with the IO-GEAR
device)
Check the setup
of the IO-GEAR
device regarding
the manual “IO-
GEAR Setup”
(check video and
document on www.
tone-swiss.com)
EEC CONFORMITY DECLARATION ACT
2006/42/EC
The undersigned: TONE Kaffeemaschinen
AG with premises at: Kasernenstraße 5,
3600 Thun, Switzerland
Declares that: The coffee machine has been
projected and manufactured in conformity
with Directive 2006/42/EC and relevant
national law, in accordance with the
following norm for conformity evaluation:
UNI 9887, ISPSEL rev. 95.
7. TECHNICAL DATA
Type
TONE TOUCH 03
Dimensions in mm
(w x h x d)
242 x 505 x 324
Weight
22 kg
Boilervolume
boilerless
Maximal waterflow
8g/sek
Required water pressure
0.15 - 0.3 MPa /
1.5 - 3 Bar
Maximal water pressure
0.6 MPa / 6bar
Noise level
< 50 dB
The electrical ratings can be found on
the type plate which you will find on the
device.