Swing menu
- The Swing menu is used to set the amount of swing used in the arp
playback (Default Straight)
To create a more 'human' feel to the arpeggiator, you can increase the amount of 'swing'
from 0 (no swing) to 99 (full swing). The swing feature alternately delays and rushes the
arpeggiator steps to add feel.
Velocity / Gate menu
-
The Velocity/Gate section consists of a step sequencer that
you can use to set the amount of velocity per step. This is used in conjunction with the
Modulation Matrix in which the velocity should be assigned to the preferred modulation
target.
4.9 Effects
Saurus contains three major effects that can be used globally. These are :
I) Chorus – a stereo chorus effect with speed and depth controls, the mix amount
controls the ratio of dry signal to wet signal.
II) Reverb – a reverb effect with size and damping controls to fine tune the reverb
amounts and its effect.
III) Delay - A synchronized delay (To host's tempo) with controllable mix amounts
and feedback amounts.
IV) Tube – This controls the amount of analogue tube warmth to be added to the signal.
-20-
