148
6.4.3.34
Address34 (Current Low Limit)
1)
Command Description
This command is used to query the current low limit of the current step in the programmed mode.
2)
Send Instruction Format
3)
Return Instruction Format
When the set voltage is not greater than 150V, the return command data range is 0.000~8.400A; when
the set voltage is greater than 150V, the return command data range is 0.000~4.200A. When this
parameter returns to 0.000, it means that this function is off.
6.4.3.35
Address 35 (Set Frequency)
1)
Command Description
This command is used to query the output frequency value of the current step in the programmed mode.
2)
Send Instruction Format
Instrument
address
Function Code
Number of Data
Data Byte 1~4
CRC Low
CRC High
1~32
0x03
0x04
0.000~4.200 or
0.000~8.400, 4 bytes
stored in float point
type
Calculated based on the first 7 bytes
Instrument
address
Function
Code
High Address
Low Address
High bytes
Low bytes
CRC Low
CRC High
1~32
0x03
0x00
0x22
0x00
0x02
Calculated based on the first 6
bytes
Instrument
address
Function Code
Number of Data
Data Byte 1~4
CRC Low
CRC High
1~32
0x03
0x04
0.000~4.200 or
0.000~8.400, 4 bytes
stored in float point
type
Calculated based on the first 7 bytes
Instrument
address
Function
Code
High Address
Low Address
High bytes
Low bytes
CRC Low
CRC High
1~32
0x03
0x00
0x23
0x00
0x02
Calculated based on the first 6
bytes
Summary of Contents for TH7105
Page 14: ...9...
