150
3)
Return Instruction Format
When the voltage mode is "AUTO" and the voltage is less than 150V, the range is 0.0~33.6A; when the
voltage mode is "AUTO" and the voltage is greater than 150V or the voltage mode is "HIGH", the range is
0.0~16.8A. When this parameter returns to 0.0, it means that this feature is off.
6.4.3.38
Address 38 (AP LoLmt)
1)
Command Description
This command is used to query the peak current low limit value of the current step in the programmed
mode.
2)
Send Instruction Format
3)
Return Instruction Format
When the voltage mode is "AUTO" and the voltage is less than 150V, the range is 0.0~33.6A; when the
voltage mode is "AUTO" and the voltage is greater than 150V or the voltage mode is "HIGH", the range is
0.0~16.8A. When this parameter returns to 0.0, it means that this feature is off.
6.4.3.39
Address 39 (Power High Limit)
1)
Command Description
This command is used to query the power high limit of the current step in the programmed mode.
2)
Send Instruction Format
1~32
0x03
0x00
0x25
0x00
0x02
Calculated based on the first 6
bytes
Instrument
address
Function Code
Data Byte 1~4
CRC Low
CRC High
1~32
0x04
0.0~16.8 or 0.0~33.6, 4 bytes stored in float
point type
Calculated based on the first 7 bytes
Instrument
address
Function
Code
High Address
Low Address
High bytes
Low bytes
CRC Low
CRC High
1~32
0x03
0x00
0x26
0x00
0x02
Calculated based on the first 6
bytes
Instrument
address
Function Code
Number of Data
Data Byte 1~4
CRC Low
CRC High
1~32
0x03
0x04
0.0~16.8 or 0.0~33.6,
4 bytes stored in float
point type
Calculated based on the first 7 bytes
Summary of Contents for TH7105
Page 14: ...9...
