11
Figure 3-2 Programmable Mode <Measurement Display> page
3.1.1.1 Parameter setting description and operation
Memory
1)
Description
In manual mode, this parameter value indicates memory group number, and there are 1~50 memory
groups in total. In the programmable mode, the first number indicates the memory group number,
and there are 1~50 memory groups in total; The second value indicates the step number, a total of 1
to 9 steps. The * after the value indicates that the step connection is turned on. If there is no * after
this value, the step connection is turned off.
2)
Operation
Press the
key or knob to move the cursor to this parameter option, change the value via the front
panel numeric keys, then press ENTER or OK to confirm. When changing the value with the numeric
keys, if you do not want to change the parameter value or press the wrong numeric key, you can
cancel it by pressing
key or ESC key.
Voltage (VOLT)
1
）
Description
This parameter represents the output voltage setting, and the voltage setting range is 0.0~300.0V. In
manual mode, this parameter can be quickly changed by V-SET button. In programmable mode
measurement display page, this parameter cannot be changed.
2
）
Operation
Press the
key or knob to move the cursor to this parameter option, change the value by front panel
numeric keys, then press ENTER or OK button to confirm. When changing the value with the numeric
keys, if you do not want to change the parameter value or press the wrong numeric key, you can
cancel it by pressing the
key or ESC key.
Summary of Contents for TH7105
Page 14: ...9...
