159
6.4.3.55
Address 55 (Frequency Low Limit)
1)
Command Description
This command is used to query the low frequency limit value in the programmed mode.
2)
Send Instruction Format
3)
Return Instruction Format
The return instruction data range is 0 or 45.0~500Hz. When the frequency is less than 100 Hz, the
resolution is 0.1 Hz; when the frequency is not less than 100 Hz, the resolution is 1 Hz. When this
parameter returns to 0.0, it means that this feature is turned off.
6.4.3.56
Address 56 (Starting Angle)
1)
Command Description
This command is used to query the starting angle in the programmed mode.
2)
Send Instruction Format
3)
Return Instruction Format
Return instruction data range is 0~359
Instrument
address
Function
Code
High Address
Low Address
High bytes
Low bytes
CRC Low
CRC High
1~32
0x03
0x00
0x37
0x00
0x02
Calculated based on the first 6
bytes
Instrument
address
Function Code
Number of Data
Data Byte 1~4
CRC Low
CRC High
1~32
0x03
0x04
0 or 45.0~500, 4 bytes
stored in float point
type
Calculated based on the first 7 bytes
Instrument
address
Function
Code
High Address
Low Address
High bytes
Low bytes
CRC Low
CRC High
1~32
0x03
0x00
0x38
0x00
0x01
Calculated based on the first 6
bytes
Instrument
address
Function
Code
Number of
Data
Data Byte1
Data Byte2
CRC Low
CRC High
1~32
0x03
0x02
0~359 High
8-bit
0~359 Low 8-bit
Calculated based on the first 5
bytes
Summary of Contents for TH7105
Page 14: ...9...