16
Figure 3-7 PROG SETUP Mode <MeasDisp> Page
3.1.2.1 Soft key Instruction and Operation
PARA DISP
1
）
Description
This soft key is used to switch display of output parameters. When pressed, all output parameters are
displayed.
2
）
Operation
Under <MeasDisp> page, press the PARA DISP soft key to switch the display of output parameters.
AUTO
1)
Description
This key is the voltage mode setting key, which can be set to “AUTO” or “HIGH”. When the voltage
mode is set to “AUTO”, it will automatically judge whether the voltage is high or low based on the
setting voltage. When the voltage mode is set to “HIGH”, the voltage will be set to HIGH (i.e. the range
of 0~300V).
2)
Operation
In <Measurement Display> page, press AUTO soft key to switch between “AUTO” and “HIGH”
DATA HOLD
1)
Description
This key keeps the output constant.
2)
Operation
Summary of Contents for TH7105
Page 14: ...9...
