44
3)
After the file name is entered, press ENTER or OK to save the file. If the entered file name is the same as
the previous file name, a prompt will appear in the prompt bar at the bottom of the screen. If a user did not
enter a file name, and pressed ENTER or OK, the default file name is UNNAMExx. STA (Note: xx represents
the current file serial number).
Load
1)
Press
button to move the cursor to the file number to be loaded.
2)
Press the Load key to load the file where the cursor is located.
Copy to E:
1)
Press
button to move the cursor to the file number to be copied.
2)
Press the Copy to E: soft key to copy the file where the cursor is located to the U disk. If no U disk is
plugged in the instrument, an error shall be prompt. In order to operate correctly, please insert a U disk into
the front panel USB interface before copy the file.
Delete
1)
Press
button to move the cursor to the file number to be deleted.
2)
Press the DEL. key to delete the file where the cursor is located.
4.2
External File
4.2.1
Description
The TH7100 series programmable AC power supply can store all the parameters that set by the user into the
external memory in the form of a file, such as a U disk. When users need to use the same settings the next
time, users do not need to reset the parameters, just load the corresponding file, you can get the same settings
as last time. “E”
is the short for
External
, which stands for the external memory. As shown in Figure 4-2.
Summary of Contents for TH7105
Page 14: ...9...
