91
6.3.6.5 :FETCH: PF?
Command Syntax: :FETCH:PowerFactor?
Shorthand for command: :FETCH:PF?
Command description: This command is used to query the power factor in manual mode, and the
command is valid when the output is turned on.
6.3.6.6 :FETCH: CF?
Command Syntax: :FETCH:CrestFactor?
Shorthand for command: :FETCH:CF?
Command description: This command is used to query the crest factor value in manual mode, and the
command is valid when the output is turned on.
6.3.6.7 :FETCH?
Command Syntax: :FETCH?
Command description: This command is used to query the measurement parameters such as voltage,
current, power, ampere current, power factor, and crest factor in manual
mode.The return form is: 100.0, 1.000, 100.0, 1.42, 1.000, 1.413
6.3.7
SYStem Subsystem Commands
The SYSTem subsystem command is used to set the parameters under the system settings. The SYSTem
subsystem command structure is shown in Figure 6-9.
Summary of Contents for TH7105
Page 14: ...9...
