12
9. DUMP LOCK BRACKET ASSEMBLY:
• Turn the dump upside down gently.
• Set the dump lock bracket as shown (aim at three holes in the dump), and
tighten with two Ø4x16 round head screws first.
• Turn the dump back to upright position, and tighten with another Ø4x16
round head screw as shown.
10. DUMP ASSEMBLY
• Push and hold the dump lock (between the seats) forward (riding position) so
that the dump can be located horizontally over the truck body.
• Fit the tabs on the bottom of dump into the slots in the vehicle body as shown.
• Insert eight Ø4 x16 round head screws, and tighten securely with a screwdriver.