18
3. Intended Use
The hot-air soldering/desoldering system is used to perform soldering work with SMD parts in connection with suitable
soft solders (lead/silver solder) by hot air. The solder temperature can is adjustable, the air nozzle can be replaced. A
display shows the set temperature.
The enclosed holder must be attached to the side of the hot-air soldering/desoldering system; the hot-air nozzle can
be put on it (e.g. during work breaks).
The hot air soldering/unsoldering system is only suitable for operation on mains voltage (230 V/AC, 50 Hz).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
For reasons of safety and approval, the product must not be converted and/or changed by you. Using the product
for any other purposes than those described above may damage the product. Improper use also may cause dangers
such as short circuit, fire, electric shock, etc. Read the operating instructions precisely and keep them. Only pass the
product on to any third parties together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
4. Scope of Delivery
• Hot air soldering/unsoldering system
• Holder
• 3x nozzle
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR
code. Follow the instructions on the website.
