16
9. Maintenance
Always disconnect the compressed air hose reel from the compressed air supply before carrying
out any cleaning, maintenance or repair work.
•
The product is low-maintenance and only contains a few parts that require maintenance. Repair work must be done
by a specialist technician.
• Keep the hose clean to ensure that the product works properly.
•
Remove any dirt that accumulates on the connecting parts. Regularly check the valves to ensure that there are no
loose connections, leaks, cracks or other signs of damage.
•
Check the connecting parts from time to time to ensure that there are no loose connections or signs of damage.
10. Troubleshooting
Always disconnect the compressed air hose reel from the compressed air supply before carrying out any
maintenance or repair work.
Fault
Possible cause
Solution
The hose does not wind
back onto the drum fully.
• The hose is tangled.
• Unroll the hose and then roll it back onto
the drum in a straight line.
Air escapes from an
unsealed location.
• The hose is damaged.
• The connector may be worn out.
•
Replace the hose (feeder hose or
compressed air outlet hose).
•
Contact a technician to replace the
connector.
11. Maintenance and cleaning
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
housing or even impair the functioning of the product.
• Only use mild detergents to clean the compressed air hose.
• Use a dry, lint-free cloth to clean the frames and hose drum.
