• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Persons and product
• To avoid the risk of injury (e.g. back injuries), ask someone to help you when lifting
heavy objects.
• Check the contents of the packaging before assembling the product. You will not
be able to assemble the product unless all components are present.
• Proceed with care when assembling and mounting the product! This product has
some sharp edges which have the potential to cause injury! There is also the risk
of your fingers becoming trapped.
• Only perform the steps necessary to mount the product. Never attempt to convert,
modify or repair the product.
• Proceed with caution when mounting the shelves. Installing the shelves incorrectly
may result in costly damage and cause injuries.
• Do not overload the product. Refer to the technical data for information on the
load capacity.
• Load the product as evenly as possible.
• Always observe the maximum load capacity of the supporting surface.
•
Only place the product on a flat, stable surface.
• Do not use the product as a climbing aid (e.g. ladder).
• Check that the product is working properly before using it.
• If in any doubt, contact a technician for assistance; do not attempt to mount the
shelves yourself.
Installation
The following tools/accessories are required to mount the shelves:
• Work gloves
• Mallet or hammer
• Flat piece of wood
Follow the diagrams in these operating instructions!
Orientation A
Orientation B
• Place the feet onto the eight upright braces. Four feet should be placed in orientation A,
and the other four feet should be placed on the other four upright braces in orientation B.
• On the bottom the rubber corners function as feet, and on the top they cover the edges of
the upright braces.
• Take two upright braces in orientation A and connect
them to two cross braces at the desired height. The feet
should be level with the floor.
•
Start by inserting the lower cross brace first.
•
After inserting the cross brace into the first keyhole,
insert the other end into the opposite keyhole that is at
exactly the same height (the cross brace must be in a
horizontal position).
• Repeat these steps to assemble the other two upright
braces in orientation A.
Operating instructions
Heavy-duty rack 350 kg
Item no. 1530556
Intended use
This product is designed to store loads of up to 350 kg per shelf. The shelves can be mounted
at different heights.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
For safety reasons, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use
may cause injuries or other hazards. Read the instructions carefully and store them in a safe
place. Make this product available to third parties only together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• 5x shelves
• 8x feet
• 8x upright braces
• 10x longitudinal braces
• 10x cross braces
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material unattended, as it may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
