b) Power Adapter
• The power supply must be located near to the device and be easily accessible.
• The mains outlet must be located near to the device and be easily accessible.
• As power supply, only use the supplied mains adaptor.
• Only connect the power adaptor to a normal mains socket connected to the public
supply. Before plugging in the power adaptor, check whether the voltage stated on
the power adaptor complies with the voltage of your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the cable;
always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket during
storms.
c) Product
•
Risk of fire!
If used improperly, the product can act like a burning lens and
direct the sunlight/bright light source to one single small point, creating very high
temperatures.
• Do not use the product to view bright light sources (e.g. the sun) to prevent
damage to your eyes/loss of sight.
• Always cover the lens or keep away from sunlight when not in use. There is a risk
of fire during direct sunlight
• since the lens acts like a burning glass.
• Never use the device immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. Allow the
device to reach room temperature before connecting and using it. This may take
several hours.
• Never pour liquids above or near the product.
•
Attach the clamp bracket to a horizontal, flat, and stable surface only. Do not
attach any objects (e.g. decorative material) to the product.
•
Never mount the product in the vicinity of easily flammable materials (i.e. curtains,
fabrics, etc.). Make sure no object (e.g. curtain) can touch or come near the lamp
head, for example due to a draught. Otherwise there is a risk of fire!
• For installations in industrial facilities, follow the accident prevention regulations
for electrical systems and equipment of the government safety organization or the
corresponding authority for your country.
Operating Elements
4
3
2
1
5
6
7
8
9
1 LED light
2 Lens lock
3 Magnifying lens
4 Power button
5 Gooseneck
6 DC input jack
7 Lamp attachment plug
8 Clip attachment socket
9 Mounting Clip
Operating Instructions
Magnifying Lamp with Desk Clip 100 mm 3D
1.75x 500 Im
Item No. 1712599
Intended Use
This product is intended for magnifying the view of objects, illuminated by an LED ring lamp.
It can be secured to a suitable surface (e.g. table, work bench) using the mounting clip and is
powered via mains adaptor.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Lamp
• Clip
• Power adaptor
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the device from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
device.
•
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Attention, LED light:
-
Do not look directly into the LED light!
-
Do not look into the beam directly or with optical instruments!
