b) Electrical safety
•
Never pour liquids over electrical devices or place objects filled with liquid next
to the product. If liquid or an object does enter the interior of the device, power
down the respective socket (e.g. switch off the circuit breaker), and then remove
the mains plug from the mains socket. Discontinue use and take the product to a
specialist repair centre.
•
Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated may destroy the product. The mains
adapter may also cause a fatal electric shock!
•
Allow the product to reach room temperature before connecting it and putting it to
use. This may take several hours.
•
Do not touch the mains adapter if there are any signs of damage, as this may
cause a fatal electric shock! Switch off the mains voltage to the socket containing
the power adapter (switch off at the corresponding circuit breaker or remove the
safety fuse, and then switch off at the corresponding RCD protective switch). You
can then unplug the mains adapter from the mains socket. Replace it with a power
adapter of the same design.
•
The mains outlet must be located near to the device and be easily accessible.
•
Only power the product using the mains adapter provided.
•
Only connect the power adapter to a normal mains socket connected to the public
supply. Before plugging in the power adapter, check whether the voltage stated on
the power adapter complies with the voltage of your electricity supplier.
•
Never connect or disconnect power adapters if your hands are wet.
•
Never unplug the mains adapter from the mains socket by pulling on the cable;
always use the grips on the plug.
•
When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
•
Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
•
For safety reasons, disconnect the power adapter from the mains socket during
storms.
c) Persons and product
•
Do not look directly into the light source when the lamp is in use.
•
Never look at bright light sources (e.g. LED lamps or lasers) through the magnifying
glass. This may result in eye injuries.
•
Always keep the glass lenses away from direct sunlight when the lamp is not in
use. Strong sunlight that shines through the magnifying glass can result in the
burning glass effect and may cause a fire.
•
Warning, LED light:
-
Do not look directly at the LED light!
-
Do not look into the beam directly or with other optical instruments!
•
Do not secure any objects (e.g. decorations) to the product.
•
Never mount the product in the vicinity of easily flammable materials (i.e. curtains,
fabrics, etc.). Make sure no object (e.g. curtain) can touch or come near the lamp
head, for example due to a draught. Otherwise there is a risk of fire!
•
Always comply with the accident prevention regulations for electrical equipment
when using the product in industrial facilities.
•
In schools, educational facilities and hobby or DIY workshops, the product and
accessories must be operated under the supervision of qualified personnel.
Operating Elements
1
Main lens cover
2
Small lens
3
Lamp head adjust lock
4
Upper arm
5
Lower arm
6
DC input jack
7
Lamp attachment plug
8
Clamp socket
9
Base clamp
10
Clamp screw
11
Main lens
12
Superbright LED
13
UV LED
14
Ring light LED
15
Light control panel
1
11
13
2
3
4
5
6
7
8
9
10
15
12
14
Operating instructions
UV LED clamp-on magnifier lamp
Item no. 1933084
Intended use
This lamp is designed to illuminate work spaces and features a magnifying glass that provides
a close-up view of objects. It must to be securely attached to a suitable surface (e.g. table or
workbench) using the clamp. The product is powered by the included power adapter.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture
(e.g. in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
•
Magnifying lamp
•
Power adapter
•
Clamp
•
Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads
or
scan the QR code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the
product.
The product must only be installed and used in dry, indoor locations. It must not
become damp or wet, as this may cause a fatal electric shock!
This device was constructed according to protection class III. Devices in protection
class III have no connection for protective insulation - they must not be connected to
the protective earth.
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, stop using it and prevent
unintended use. Safe operation can no longer be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stress. Always handle the
product carefully. Jolts, impacts or a fall even from a low height may damage
the product.
•
Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
•
Maintenance, modifications and repairs must be done by a technician or a
specialist repair centre.
•
If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
