Operating Elements
1
2
3
4
5
1 Belt clip
2 Power button / red LED
3 USB-A charging port
4 USB-A charging port
5 Battery slot
Operation
a) Insert / Remove Battery (Not Included)
• To insert a battery pack, align the tab on the battery with the slot on
(5)
the base of the
charging adaptor.
• Slide the battery all the way in until it locks into place with a “click”. Make sure it is securely
fixed in place before letting go.
• Do not use force when inserting the battery. If it does not slide in easily, the battery is not
being inserted correctly.
• Press the battery release button to remove the battery pack.
b) Charging
Charging performance can vary depending on the type of cable used. It is preferrable
to use the charging cable that came with your device.
• Connect one end of the USB charging cable to an available USB-A charging port
(3)
or
(4)
,
and the other end to your device.
• Press the power button
(2)
, the LED will light up to indicate charging has started.
• Press the power button again, the LED will turn off and charging will stop.
- LED turns off after 10s after disconnecting the last USB device.
- LED turns off after 10s when all connected devices with no output signal are fully charged
e.g. power bank.
- LED stays on after 10s: When all connected devices with an output signal are fully
charged e.g. smartphones.
When charging one device, the max. current is 5V/DC 2 A. When charging two
devices, 5V/DC 2 A will be shared between both ports.
Care and Cleaning
• Remove the battery pack and disconnect any devices before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Spare Items (Batteries / Chargers)
Item No.
Description
1881809
Li-ion rechargeable battery (AP-1000 20 V/2 Ah)
1881810
Li-ion rechargeable battery (AP-1100 20 V/4 Ah)
1881811
20 V 2.3 A charger ALG-1000 for (AP-1000 20 V/2 Ah)
1881812
20 V 5.0 A charger ALG-1100 for (AP-1100 20 V/4 Ah)
Visit the Conrad website and search Item No. 2149355 for information about any
optional accessories, spares, or replacement parts.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical Data
Operating voltage .........................
20 V Li-ion battery
Charging output ............................
5 V/DC 2 A (total)
Charging times .............................
approx. 2.5 hr (2000 mAh battery)
approx. 5 hrs (4000 mAh battery)
Material ........................................ ABS
Operating/Storage conditions .......
0 to +40 ºC, <85 % RF (non-condensing)
Dimensions (W x H x D)
...............
66 x 37 x 97 mm
Weight ..........................................
77 g
Operating Instructions
SGA-010 USB charging adapter for 20 V batteries
Item No. 2149355
Intended Use
The product converts compatible batteries (not included) into a portable charger capable of
charging up to two USB compatible electronic devices at the same time. The total charging
output is 5V/DC 2 A. A built-in clip attaches to a belt or holster for increased portability.
Contact with moisture must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Charging adaptor
• Operating instructions
Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
•
Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
•
Consult an expert when in doubt about the operation, safety or connection of the
appliance.
•
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Battery and Charger
• Refer to the battery and battery charger operating instructions for further
information.
• Only use this adaptor with the batteries indicated in “Spare Items (Batteries /
Chargers)”
c) Connected Devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
*2149355_v2_0120_02_dh_m_en
