b) General information
• The device is not a toy. Keep it out of the
reach of children and pets.
• Do not leave packaging material lying
around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme
temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases,
steam and solvents.
• Do not place the product under any
mechanical stress.
• If it is no longer possible to operate the
product safely, take it out of operation and
protect it from any accidental use. Safe
operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in
poor ambient conditions or
- has been subjected to any serious
transport-related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about
the operation, safety or connection of the
appliance.
•
Maintenance, modifications and repairs
must only be completed by a technician or
an authorised repair centre.
• If you have questions which remain
unanswered by these operating
instructions, contact our technical support
service or other technical personnel.
• In schools, educational facilities, hobby
and DIY workshops, the product must be
operated under the supervision of qualified
personnel.
• For installations in industrial facilities,
follow the accident prevention regulations
for electrical systems and equipment of
the government safety organization or the
corresponding authority for your country.
c) Electrical
• The product is built according to protection
class I. It must be powered by a standard
earthed mains socket.
• The mains socket that you use to connect
the power cable must be easily accessible.
• Before connecting the product, make sure
that the mains voltage in your region meets
the specifications on the name plate. Only
connect the product to the mains socket
when it is switched off.
• Do not pull the mains plug from the mains
socket by pulling on the cable.
• Do not touch the mains cable or the
workstation if there are any signs of
damage, as this may cause a fatal electric
shock!
• If the mains cable is damaged, it must
be replaced by a new mains cable with
the same specifications. Stop using the
damaged mains cable and dispose of it in
an environmentally friendly manner. Do not
attempt to repair the damaged mains cable.
• Never use the product immediately after
it has been brought from a cold room
into a warm one. This may generate
condensation, which can cause the product
to malfunction or damage the interior
components. Moisture on the workstation,
mains cable or power adapter may also
cause a fatal electric shock!
• Caution! If liquid does enter the workstation,
switch off the mains voltage to the socket
containing the mains plug (switch off at the
corresponding circuit breaker or remove
the safety fuse and then switch off at the
corresponding RCD protective switch). You
can then unplug the power adapter from
the mains socket.
• Discontinue use immediately and take
the product to a specialist repair shop or
dispose of it in an environmentally friendly
manner.
a) Operation
• Never touch the barrel or tip of the
soldering iron during use. Risk of burns!
• Never use the soldering iron to heat up
liquids.
• Never solder live electrical components or
parts. Always switch off the power before-
hand.
• Do not cover or fasten any items to the
soldering iron. Otherwise there is a risk
of fire.
• Touching or soldering capacitors (or
similar components) or leads/cables that
are connected to capacitors may cause a
fatal electric shock! Capacitors may stay
charged for several hours after you switch
off the power supply!
•
Risk of fire or explosion! Do not use around
or near explosive or flammable materials.
• Turn the power off and place the soldering
iron on the stand while taking breaks or not
using.
b) Personal
•
Ensure that there is sufficient lighting.
• Ensure proper ventilation during soldering.
Solder and flux vapours can be harmful to
your health.
• Wash your hands thoroughly after working
with solder. This is particularly important
when using lead-based solder.
• Do not put soldering alloys into your mouth.
Do not eat or drink during soldering.
• Wear suitable protective clothing and
safety goggles when soldering. Liquid/
splashing solder may cause serious burns
or eye damage.
d) Location
• Place the workstation on a clean, level,
non-flammable surface of a sufficient size.
Protect the workstation against vibrations.
Do not place the workstation on a flamma
-
ble surface (e.g. rug or tablecloth). Always
use a non-flammable, heatproof surface.
•
Keep the workstation away from flammable
or combustible materials (e.g. curtains).
• Do not use the product in the immediate
vicinity of strong magnetic/electromagnetic
fields, transmitter aerials or HF generators.
These may affect the electronic control
system.
•
Ensure that there is sufficient lighting.
• Keep your work area clean and tidy.
e) Fuse
• A defective fuse must be replaced with a
new fuse with the same specifications (see
“Replacing the fuse”).
• Do not repair or bridge a defective fuse,
as this may cause a fire or result in fatal
electric shock.
Operating Instructions
Professional Dual-Iron Soldering Station, 240 W
Item No. 2248468
Intended use
The product is a professional soldering station with a TFT display, push button controls, and
two soldering iron sockets.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Soldering station
• 2x 100 W soldering irons
• 2x Stands
• 2x wet sponge
• 2x dry sponge
• 2x Soldering iron tips
•
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
Ensure proper ventilation during soldering. Solder and flux vapours can be harmful
to your health.
The product must only be installed and used in dry, indoor locations. It must not
become damp or wet, as this may cause a fatal electric shock!
Risk of burns! Surfaces become extremely hot, handle with care.
Read the operating instructions carefully and especially observe the safety
information.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) Important safety information
• This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and/or knowledge if they have been given supervision
or instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by
children without supervision.
• WARNING - This tool must be placed in the stand
when not in use.
