28
b) Display
8 8
. .
8 8
. .
REAL SET
8
E
.
8
.
8
.
%
B
A
C
D
E
F
G
H
A Locked
B Set value
C
REAL
: actual temperature
D
SET
: Settings
E Actual temperature value
F Heating power
G Temperature unit
H
Airflow percentage
9. Connection and setup
a) Assemble the hot air gun holder
The hot air gun holder must be attached to the main unit before use.
Left side
Right side
• The holder can be mounted to the left or right side of the main unit:
•
Use 4x screws (included) to attach the mounting plate to the hot air gun holder as shown.
•
Use 2x screws (included) to attach the mounting plate to the left or right side of the main unit.
• Before connecting to the power supply, check the attachment is secure by placing the hot air gun into the holder.
b) Power supply
The power switch must be in the OFF position, and the mains cable should not be connected to the power
supply.
• Make sure the main power switch is in the
O
(OFF)
position.
• Connect one end of the power cable into the power socket on the rear of the main unit and the other end to a
mains power supply.
