• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Electrical safety
• The mains outlet must be located near to the device and be easily accessible.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it
from the mains socket using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the device for an
extended period of time.
• Disconnect the mains plug from the mains socket in thunderstorms for reasons
of safety.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or put under mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable. Otherwise the
mains cable may be damaged. A damaged mains cable can cause a deadly
electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective
mains socket (e.g. via the respective circuit breaker) and then carefully pull the
mains plug from the mains socket. Never use the product if the mains cable is
damaged.
• A damaged mains cable may only be replaced by the manufacturer, a workshop
commissioned by the manufacturer or a similarly qualified person, so as to prevent
any danger.
• Never plug in or unplug the mains plug when your hands are wet.
• The device is still connected with the mains when it is switched off. To disconnect
it completely from the mains, the mains plug has to be pulled out from the socket.
c) Positioning
• Never position the product in the vicinity of combustible or easily flammable
materials, (e.g., curtains, decorative materials, etc.).
• Ensure that no objects (e.g., a curtain) can come into contact with the lamp or
come into its vicinity due to drafts, as this may present a fire hazard.
• The entire lamp must be placed out of the reach of children. Children may knock
over the lamp, which may cause an injury or a fire.
• Never place the lamp on an unstable surface, as it may cause an injury if it falls
over.
d) Operation
• Never leave the lamp unattended when it is in use.
• Never cover the lamp when it is switched on.
• Do not look directly into the light source when the lamp is in use.
• Never use the magnifying glass to look directly at bright sources of light. This may
cause eye damage.
• Never look at bright light sources (e.g. LED lamps or lasers) through the magnifying
glass. This may result in eye injuries.
• Always cover the glass lens with the lens cover when the lamp is not in use. Strong
sunlight that shines through the magnifying glass can result in the burning glass
effect and may cause a fire.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with other optical instruments!
• Check the lamp for damage from time to time. Discontinue use and take the
product to a specialist workshop.
Mounting
Never position the product in the vicinity of combustible or easily flammable
materials, (e.g., curtains, decorative materials, etc.).
Ensure that no objects (e.g., a curtain) can come into contact with the lamp or come
into its vicinity due to drafts, as this may present a fire hazard.
1. Fasten the clamp to a suitable surface, such as the edge of a table or a windowsill.
2. Turn the screw clamp clockwise until the clamp is fastened securely to the surface.
3. Insert the lamp stand into the clamp holder and adjust the lamp position as required. Fasten
the lamp head using the butterfly screw.
Operating Instructions
22 W Magnifying lamp
Item No. 2435419
Intended use
This product is a magnifying glass with three dioptres on arm lamp. It is intended to produce
a magnified image of objects. It needs to be firmly mounted on a suitable surface such as
a table, a window shelf or a wall. The balanced arm allows the lamp to be set to a desired
position.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Magnifying lamp
• Round fluorescent tube
• Clamp
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The structure of the device complies with safety class II (double or reinforced
insulation). Make sure the insulation of the product is neither damaged nor
destroyed.
This symbol indicates that the device is only authorised for dry indoor use.
This symbol indicates that the device is suitable for direct mounting on combustible
surfaces.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of the
appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
