TOOLCRAFT 2471599, Original Instructions Manual

24

7.7.3 Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a 

power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while 

operating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source 

and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or 

energising power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a 

rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in 

unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving 

parts. Loose clothes, jewellery or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection facilities, ensure these are 

connected and properly used. Use of dust collection can reduce dust-related hazards.

7.7.4 Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do 

the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before making any 

adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk 

of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool 

or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power tools.

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into ac-

count the working conditions and the work to be performed. Use of the power tool for operations different 

from those intended could result in a hazardous situation.

7.7.5 Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will 

ensure that the safety of the power tool is maintained.