36
Accessory
Application
Sanding backing pad (15) / Sandpaper (16)
(provided grits: P60, P80, P120)
Use for sanding.
Tips:
• Use P24 or P36 grit for heavy stock removal; P40
or P60 or P80 grit for medium stock removal and
P120 grit for finishing. Begin with a coarse grit,
using successively finer grits to obtain the desired
finish. Use light pressure and long, sweeping, side
to side strokes, advancing forward to produce the
desired finish.
• Sand with continuous motion, applying moderate
pressure.
• Use the entire surface of the sandpaper, not only
the tip or sides.
• Always change worn sandpaper, or the backing pad
can get damaged.
Semi circle saw
(Conrad Item No. 1661801)
Use for:
• Sawing of openings in a surface
• Sawing of gaps
• Cutting tiles
• Small repairs to tiled areas indoors and to brick
walls.
Tips:
• Use high speeds (5-6).
• Plunge cutting is allowed only in soft materials such
as wood or plasterboard.
• Use moderate pressure to avoid burning or
scorching a workpiece.
Summary of Contents for MW-500
Page 37: ...40 ...
