Page 5
4. RUNNING & STOPPING THE MACHINE
1. After fixture, using a stick to check if the fan works and if the impeller is toucher other
components or not.
2. The working voltage should be the same as the nameplate. When using plug power, it must
confirm to IEC 335-1. If you use direct power, you must use a fixed distribution wire to fix the
switch.
3. The rotation switch is of 3 steps adjustment.
4. When adjusting the fan shaking, the middle connecting pole should be static, the other two
sides can rotate.
5. Until water tank is filled with water spraying cannot start.
6. When fan is working correctly, switch the fan off, then turn on the spraying switch.
7. Adjust the spraying capacity by adjusting the water valve.
8. If spraying is not required you can turn off the spraying switch.
