Toolex 598557, Instruction Manual

Page 6

CONTENTS OF PACKAGE

6

UNPACKING AND CLEAN-UP

1.  Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to 

make sure that all of the items are accounted for, before discarding any packing material. Place parts on a 

DO NOT turn your machine ON if any 

are missing. You may cause injury to yourself or damage to the machine.

of these items

2.  Report any shipping damage to your local distributor. Take photographs for any possible insurance claims.
3.  Clean all rust protected surfaces with ordinary house hold type grease or spot remover.  Do not use; 

gasoline, paint thinner, mineral spirits, etc. These may damage painted surfaces. 
4.  Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean dry cloth. 
5.  Set packing material and shipping carton aside. Do not discard until the machine has been set up and is 

running properly.

TABLE OF LOOSE PARTS

A.  Belt & Disc Sander Assembly
B.  Sanding Belt Table
C.  Lever Handle for Sanding Belt Table
D.  Washer 8mm
E.   Miter Gauge

F.  Hex W rench 3mm
G.  Sanding Disc Table
H.    Spring Washers 6mm (2)
I.   W ashers 6mm (2)
J.   Locking Handles for Sanding Disc Table (2)
K.   Manual & Warranty Card (not shown)

A

B

C

D

E

F

G

H

I

J

Note: Not Actual Toolex Product Pictured below