@ToolkiRC 2021
20
in the corresponding work mode.
3. For the discharge mode setting, please refer to
the <System Settings> chapter of this manual.
==================================================
8. NiMh setting (PeakV)
When the battery type is NiMh, the negative
pressure value when the battery is fully charged can be
set, the range of which can be set is 5mV-15mV, as
shown below:
===================================
Tips:
1, Only NiMh battery can set negative battery
voltage.
2,Glossary explanation:
Summary of Contents for M7
Page 31: ... ToolkiRC 2021 31 Select PPM as shown below ...
Page 36: ... ToolkiRC 2021 36 ...
Page 38: ... ToolkiRC 2021 38 ...