@ToolkitRC 2021
8
Voltage test
1，Voltage display and balance (individual cells)
Connect the balance port of the battery to the MC8.
After the device powers on, the main page shows the
voltage of each individual cell- as shown below:
The colored bars show the voltage of the battery
graphically. The cell with the highest voltage is displayed
in red, while the cell with the lowest voltage is displayed
in blue. The total voltage and the voltage difference
(highest voltage-lowest voltage) is shown below.
On the main menu, press the roller in excess of 2
seconds to start the balance function. The MC8 uses
internal resistors to discharge the cell(s) until the pack
reaches a uniform voltage between cells (<0.005V
difference).
===================================
1，The bars are calibrated for LiPOs, it is not
accurate for batteries with other chemistries.
2，After balancing the battery pack, remove the
battery from the MC8 to prevent over-discharging.
===================================
