DT 20005
English
www.toolland.eu
14
Keep the trigger clean and free from
sediment and chemicals by regularly
flushing through after use.
If necessary remove and clean the shuttle
in the trigger.
Outlet and dip tube
To rewash the outlet or replace the dip
tube, unscrew the hose nut and pull the
outlet spigot and dip tube through the
outlet body.
Winter use
Drain liquid from all parts after use to
prevent damage from freezing.
Annual Maintenance
At least once a year thoroughly clean the
whole sprayer and apply silicone grease
to all moving parts.
Test with water and if any washer or seal
has perished it must be replaced.
FAULT FINDING CHART
Fault
May be due
to
Remedy
Weak or no
spray
1.insufficient
pressure or
loss air.
2.obstruction
1.if insufficient
pressure check
maintenance
2.if obstruction
check
maintenance
Distorted
spray
Partial
blockage in
spindle or
nozzle
Check
maintenance
Leaks
1.build up of
sediment or
foreign matter
on internal
sealing
surfaces.
1.check
maintenance
and if
necessary
replace sealing
rings.
2.replace
sealing rings
Unit will not
function
Swelling of
sealing rings
or total
blockage
Check the
maintenance
Handle rises
Faulty non-
return valve
Check the
maintenance
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your sprayer need replacement after
exceeded use, do not put it in the domestic
waste but dispose of it in an environmentally
safe way.
