VL4001
V. 02 – 09/11/2015
3
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or
to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2.
Safety Instructions
Wear safety gloves.
Wear safety shoes or heavy boots.
Wear a protection mask.
Do not touch the rotating mask.
Allow only one person to operate this machine, keep bystanders away.
Tools in motion.
Be careful not to prick your hands.
Do not clean the wedge barehanded.
Maintain, install, adjust and clean the machine only once the power supply is disconnected
according to the instructions in this manual.
Operate this machine according to the arrows.
Keep work area clean. Cluttered areas and benches invite injuries.
Consider work area environment. Do not expose power tools to rain. Do not use electric tools in damp or
wet locations. Keep work area well lit. Do not use electric tools near flammable liquids or gases.
Guard against electric shock. Prevent body contact with grounded surfaces (e.g. pipes, radiators, ranges,
refrigerators, etc.)
Keep children away. Do not let visitors come in contact with the tool or extension cord. All visitors should be
kept away from the work area.
Store idle tools. When not in use, tools should be stored in a dry, high or locked-up place out of reach of
children.
Do not overload the tools. You work better and safer in the given performance range.
Use right tool. Do not force small tools or attachments to do the job of a heavy-duty tool. Do not use tools
for other purposes than their intended purpose, e.g. do not use a circular saw for cutting tree limbs or logs.
Dress properly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves
and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain
long hair.
