- 1 -
I. Description
FMJ-1600-E-WARM is a new type of laminator with auto-peeling of liner
paper and print take-up function based on the FMJ-1600-II-Warm. It is simple
in structure, rational, user-friendly and low in cost. The top and bottom rollers
are driven by the motor while the film mandrel and liner paper roll are driven by
its own material, that is the straight internal force motion of the printed picture
between the main rollers. It saves labor power and easy to operate. Due to its
innovated structure, it is popular among users since its launch.
The machine has film mandrel, S bar and prints roller to support
consecutive laminating or long picture laminating. And the auto-peeling of liner
paper and print take-up are achieved by the rolling force of the main rollers. It is
easy to use, efficient, energy-saving and easy to regulate the velocity.
It has two types of mains values, 220-240VAC or 110VAC. Please make
sure that the power indication in the machine ID label conforms to your power
supply when you buy or install the machine.
The machine has pedal switch. You can use either hand switch or pedal
switch to operate.
II.
Specifications
Maximum Laminating Width: 1600mm (63")
Maximum Laminating Thickness: 35mm (1.4")
Laminating Speed: 0 - 6m (236") / min
Forward / Reverse: Yes
Foot Pedal: Yes
Roller’s Diameter: 120mm (4.7")
Maximum heating temperature: 60 degree, 140F
Heating Mode: Upper roller heating
Motor power: 90W
Heating Power: 1300W
Rated Power: 1400W
Auto rewind liner pickup: Yes
After Laminating Pickup: Yes
Emergency Stops: Yes
Safety Photocell: Yes
Media Core Size: 3"
power supply: AC 110V - 240V, 50Hz or 60Hz
1N/PE 220V 7A; 1N/PE 110V 13A
